Knowledge Base

Frequently Asked Questions Product Manuals Firmware History

My app doesn't match my hardware. Do I have to calibrate it?

In most cases, you can use the app without calibration but to guarantee the 1/10th cent reading, we've added a calibration feature in the app. This is a one time process per installation. This process will not need to be repeated unless the app is deleted and reinstalled.

To calibrate Strobe™ (Android) and your device:

  1. Open Strobe™ (Android) and tap the bottom right-hand corner

  2. Tap "Clear Sweetener/Temperament" and tap "OK"

  3. Tap "Tuner Settings", then "Advanced Settings", then "Calibrate Tuner"

  4. On your PC or Mac, use a 440Hz test tone to calibrate your app. We recommend using the tone generator on our website. Hover over the TOOLS topbar menu item, select Frequency Calculator, then select 440Hz in the bottom slider, and press PLAY TONE.

  5. The test tone will now start to sound A440 Hz from your computer's speakers

  6. With the tone A4 playing at a moderate volume, on the app press "Calibrate NOW" and when its done, press OK

  7. Go back to the tuning screen by tapping the arrow at the top left of the display.

  8. The app is now calibrated to the phone, this is a one-time operation and does not have to be repeated.

Was this helpful?

Help others find this information sooner.

How do I read a strobe display?

Basically, the strobe image appears to travel to the left if your instrument is flat of the desired pitch and to the right if it is sharp. On earlier models such as the StroboStomp 1, StroboStomp 2, VS-1, VS-II and V-SAM, the strobe image travels upward if your instrument is sharp and downward if your instrument is flat of the desired pitch.

Adjust your instrument until the pattern is as close to still as possible. Strobe displays are 'real-time' and extremely precise. They require very fine tuning adjustments to stop the display because the frequency/pitch of any instrument is never totally stable.

You'll quickly learn to read the display, make the most precise adjustments and appreciate the high resolution that only a Peterson provides.

Was this helpful?

Help others find this information sooner.

Can I create and store my own presets?

No. The Strobe™ (Android) presets are configured at the factory.

Was this helpful?

Help others find this information sooner.

Is the accuracy the same for all Peterson tuners?

Yes, the accuracy is within 0.1 cents (1/1000 of one semitone) as with all Peterson Strobe Tuners. An important thing to note is that Peterson Strobe Tuners have ultra high definition displays, so not only are they highly accurate in detecting a note but they have the ability to display that accuracy. Other products claim accuracy but do not have the high definition screen to display the level of accuracy in which they claim. If you cannot see the accuracy, it is of little value. Only Peterson provides High Definition Strobe Tuning.

How Accurate Is My Tuner?

Was this helpful?

Help others find this information sooner.

Are the in-app options also available for Android?

At this time, Harmonic Tuning, Spectrographs, Oscilloscope, Extended Frequency, and some Sweeteners are only available for the iOS release of iStroboSoft.

These features will soon be available on Strobe™ (Android).

Was this helpful?

Help others find this information sooner.

What is my Strobe™ (Android)’s Sweetened Tunings feature all about?

A Sweetener is a set of cent offsets or a deviation from generic Equal Temperament interval spacing traditionally used in tuning. Tuners made by Peterson, including the Strobe™ (Android), contain many choices of Sweeteners, in other words, several presets with differing interval spacing relevant to the instrument being tuned. If you’ve never been happy with how your instrument tunes up with your present tuner, a Sweetener could be just the thing to change that without any modifications whatsoever. The Strobe™ (Android) offers 4 unique and very accurate tweaks which often make all the difference.

Peterson Tuners - Sweetened Tunings

Was this helpful?

Help others find this information sooner.

How accurate is my Strobe™ (Android)?

Your Strobe™ (Android) is accurate to 0.1 cent (1/1000th of a semitone). It’s important to note, that unlike other tuners which list the detection accuracy as the main specification, the Strobe™ (Android) detection AND display accuracy is 0.1 cent due to its high definition display.

How Accurate Is My Tuner?

Was this helpful?

Help others find this information sooner.

I often tune my acoustic instrument in a loud environment. What's available to help with that?

When tuning an acoustic instrument in an environment where you cannot control the background noise, like at a gig or loud band hall, a vibration pickup is a very nice alternative to using the built-in microphone.

A Peterson TP-3 clip-on tuning pickup is a very versatile device with a 1/4" connector that can be clipped onto any portion of the instrument that vibrates, such as the headstock of a guitar or the bell or lead pipe of a horn.

A Peterson Pitch Grabber Mobile Tuning Clip utilizes a 1/8" connector for use in mobile phones or tablets with software tuners.

For instruments with a flat resonating surface, you can use a suction cup tuning pickup to reduce ambient noise interference.

TP-3 Clip-On Pickup

0

0

Pitch Grabber Mobile Tuning Clip

0

0

Suction Cup Pickup

0

0

Was this helpful?

Help others find this information sooner.

I already purchased Strobe™ (Android) but I need to download it again. What do I do?

The App Store or Google Play Store will allow you to re-download Strobe™ (Android) at no charge as long as you are using the same account as when the original purchase was made.

Was this helpful?

Help others find this information sooner.

Can I use this app with the iRig/iRig2 or Apogee Jam?

Yes. These devices are compatible with Strobe™ (Android).

Was this helpful?

Help others find this information sooner.

What is the range of Hz calibration or Concert A calibration of my Strobe™ (Android)?

The Hz calibration range of your Strobe™ (Android) is 340Hz - 540Hz. The default setting is Concert A 440Hz.

Was this helpful?

Help others find this information sooner.

There are no entries matching your search.

Not finding an answer? Open a support ticket for personalized support of your Peterson product.

Strobe™ (Android) User Guide
Strobe™ (Android) User Guide

Not finding an answer? Open a support ticket for personalized support of your Peterson product.

Privacy Policy
Terms of Use
Shipping & Returns Policy

© 2024 Peterson Electro-Musical Products, Inc. No part or parts may be copied or reproduced without the express written consent of Peterson Electro-Musical Products, Inc. The terms Virtual Strobe™, Sweeteners™, Sweetened Tunings™ and the linear & concentric strobe patterns are trademarks/registered trademarks of Peterson Electro-Musical Products, Inc.

Enjoy 10% off
Let's stay connected
Simply sign up for our email list and we'll send you a unique coupon code, plus other exclusive savings!*
Restrictions Apply.
Thanks for joining ouir mailing list!
Keep an eye on your inbox. Your exclusive offer will be arriving soon.
* Must enter email address to receive unique promo code. Upon confirmation of eligibility, subscribers will receive a one-time use promo code for 10% off their purchase at PetersonTuners.com, including mechanical tuners, Virtual Series™ strobe tuners, StroboSoft™ desktop software, BodyBeat™ series metronomes, and accessories. Discounts do not apply toward the purchase of iStroboSoft for Android or iOS or Node products. Offer subject to change at any time. Cannot be combined with another promotional offer. To take advantage of this one-time use offer enter your email address and the offer code will be delivered to that address. Please add petersontuners@petersontuners.com to your safe list to prevent your offer from going to spam. Your email address information is kept private. Privacy Policy.
Need Help?